Description
We at Lockwood International use this mesh in our world renowned RaceGrilles, the likes of Ford, Jaguar & Aston Martin also use this same grade in many of their grilles.
It is woven from 316L (premium grade) Solid Stainless Steel Wire.
It comes in one piece at 1000mm X 400mm. approx 39.5 inch X 16 inch
If you would like the mesh cut to a specific size then please contact us, the price is still the same and you will receive the offcuts with your order.
You’ll need good quality wire cutters for this mesh. Piano wire cutters are ideal.
This piece has been cut diagonally off the sheet, so that it gives the attractive diamond look (rather than the less attractive square look). The wire is approx 1.6mm in diameter. Each diamond is approx 10mm from corner to corner internally.
If you want the ultimate in appearance & durability then this is the mesh for you
Electropolishing
Electropolishing is not electro-plating or chrome plating (both electro-plating & chrome plating actually deposit a coating on the surface of the metal, but as you probably know coatings or platings can be chipped off)
Electropolishing is electro-plating in reverse. Instead of depositing a coating of another material on a surface, the action of electropolishing is to remove a surface layer, typically 20-40 micro-metres in depth in the case of stainless steel. The result is that the electropolished stainless steel surfaces become bright and highly reflective. This results from the removal of an often contaminated surface layer and the electrochemical action of micro-smoothing. The advantageous features resulting from such a bright and smooth surface are many. The passive oxide layer, which is essential to prevent stainless steel from corroding, cannot be improved upon following electropolishing. By reducing the total surface area, a result of micro-smoothing, particles and contamination are less likely to adhere to an electropolished finish. After electropolishing the surface if the stainless steel can be cleaned and kept clean more easily. The highly reflective bright finish is ideally suitable to exterior vehicle trim & grilles.
About Us: Lockwood International was established over 15 years ago. All our products are hand crafted in our premises here in Leeds and we have earned our worldwide reputation because of our attention to detail. Hundreds of thousands of our Replacement Dial Fascias, Stainless Steel Grilles and Engraved Stainless Steel Sill Protectors are sported on vehicles throughout the world. We supply to, not only private individuals but also to many specialists in the motor industry. And all of our products carry a money back guarantee.
Our Returns Policy: All we ask is that, if you are not happy with your purchase, please return it within 14 days, in the same condition that it left us, and we will refund to you the full cost of the item.
Contact Us: If you wish to speak to one of our helpful members of staff, our address is: Lockwood International, Unit 7 Croydon Street, Domestic Street Industrial Estate, Leeds, LS11 9RT or you can ring us on: 0113 2440070 or email: speedoface@lockwoodinternational.co.uk
